| Tweet |
Custom Search
|
|
|
||
 TM 55-1925-273-10-1
0042 00
Table 4. Lube Oil Purifier Control Panel (refer to figure 4)
Key
Control/Indicator
Function
1
HEATER OVERTEMP Light
This light illuminates when the unit exceeds the safe operating temperature.
2
ALARM Light
The light illuminates when an alarm condition is detected.
3
OVERLOAD OVERTEMP
The light illuminates when an overload or overtemperature condition is
Light
present.
4
MAIN CIRCUIT BREAKER
The breaker is used to turn ON and OFF the main circuit breaker. It also
allows the main circuit breaker to be reset.
5
HEATER ON Light
This light illuminates when the heater is ON.
6
Heater Switch
This switch turns the heater ON and OFF.
7
CONTROL POWER Switch
This switch turns the control power ON and OFF.
8
MOTOR RUN Indicator
This indicator illuminates when the lube oil purifier motor is running.
9
STOP Pushbutton
This red pushbutton stops the lube oil purifier motor.
10
MOTOR START Indicator
This indicator illuminates when the motor START pushbutton (table 4,
item 11) is pressed.
11
START Pushbutton
This pushbutton starts the lube oil purifier motor.
12
DIRTY OIL Indicator
This indicator illuminates to indicate that dirty oil is in the system.
13
ACKNOWL Pushbutton
This pushbutton is used to acknowledge an alarm condition.
0042 00-9
|
||
|
||
