Table 1. AMS 2 General Arrangement (refer to figure 1) (Cont)

Custom Search

Table 1. AMS 2 General Arrangement (refer to figure 1)

TM-55-1925-273-10-1 Inland and Coastal Large TUG (LT) NSN 1925-01-509-7013 (EIC XAG) Manual

Table 1. AMS 2 General Arrangement (refer to figure 1) (Cont)

TM 55-1925-273-10-1

0046 00

Table 1. AMS 2 General Arrangement (refer to figure 1) (continued)

Key

Control/Indicator

Function

Discharge Delay Cylinder

This cylinder enables a 60-second delay between actuation of the FM-200

system and release of the suppression agent.

CO2 Cylinder

This cylinder contains the CO2 gas that actuates the FM-200 System. See

figure 17 for details.

Emergency Steering Station

The emergency steering station permits steering of the vessel in the event of

a main steering system failure. See figure 19 for details.

STEERING SYSTEMS STBD

This controls the motors for the steering system power packs. See figure 20

STARTER (above) and

for details.

STEERING SYSTEMS PORT

STARTER (below)

Steering System Power Pack 2

This provides hydraulic power to operate the steering system. See figure 20

for details.

Steering System Power Pack 1

This provides hydraulic power to operate the steering system. See figure 20

for details.

Sound Powered Telephone

The sound powered telephone provides communication with the rest of the

vessel. See figure 21 for details.

GS-32 GS OVBD DISCH Valve

This valve controls the overboard discharge of general service water.

Drill Press

The drill press permits maintenance personnel to drill holes. See figure 22

for details.

Welder

The welder permits maintenance personnel to weld metals. See figure 23

for details.

Space Heater

The space heater heats the workshop area. See figure 24 for details.

HVAC SYSTEM

This controller turns ON and OFF the exhaust fan in the workshop. See

CONTROLLER FOR

figure 25 for details.

EXHST FAN

Bench Grinder

The bench grinder permits personnel to grind metals. See figure 26 for

details.

Potable Water Gauge Panel

This panel provides gauges and indicators for the potable water system. See

figure 27 for details.

#2 POTABLE WATER

This motor controller turns ON and OFF potable water pump 1. See figure

PUMP Motor Controller

28 for details.

#2 POTABLE WATER

This motor controller turns ON and OFF potable water pump 2. See figure

PUMP Motor Controller

28 for details.

FM-200 Cylinder

This cylinder contains FM-200 agent for the bilge system. See figure 17 for

details.

Potable Water Pump 1

This pump pressurizes and pumps potable water for use aboard the vessel.

See figure 29 for details, including associated valves.

0046 00-3