| Tweet |
Custom Search
|
|
|
||
 TM 55-1925-273-10-1
0046 00
Table 34. Fire and General Service Pump Motor Controllers and Pressure Gauges (refer to figure 34) (continued)
Key
Control/Indicator
Function
5
START Pushbutton
Push this button to START the pump.
6
STOP Pushbutton
Push this button to STOP the pump.
7
AUTO/MAN Switch
This permits selection of operating mode. When in the AUTO position, the
pump turns ON and OFF automatically depending upon system require
ments. When in the MAN position, the pump runs continuously.
8
RESET Pushbutton
Push this button to RESET the motor controller.
9
FIRE MAIN PRESS Gauge
This indicates the pressure available in the fire main.
10
#2 FIRE/GENL SVCE PMP
This indicates the discharge pressure of fire and general service pump 2.
DISCH PRESS Gauge
11
#1 FIRE/GENL SVCE PMP
This indicates the discharge pressure of fire and general service pump 1.
DISCH PRESS Gauge
12
#1 FIRE AND GENERAL
This controls the operation of fire and general service pump 1.
SERVICE PUMP
(EMERGENCY) Motor
Controller
13
ON/OFF Breaker
This turns the motor controller ON and OFF and provides circuit protection
to the unit.
14
POWER AVAILABLE
This illuminates to indicate that power is available to the motor controller.
Indicator
15
MOTOR RUN Indicator
This illuminates to indicate that the motor is running.
16
START Pushbutton
Push this button to START the pump.
17
STOP Pushbutton
Push this button to STOP the pump.
18
AUTO/MAN Switch
This permits selection of operating mode. When in the AUTO position, the
pump turns ON and OFF automatically depending upon system require
ments. When in the MAN position, the pump runs continuously.
19
RESET Pushbutton
Push this button to RESET the motor controller.
0046 00-46
|
||
|
||
