| Tweet |
Custom Search
|
|
|
||
 TM 55-1925-273-10-1
0082 00
FLAP SETTING
1.
Perform the Initial Startup procedure in this work package.
2.
OPEN the cover (figure 27, item 1) on the radio room rooftop air conditioning unit remote (figure 27, item 2).
3.
To select the AUTO flap setting, press the FLAP button (figure 27, item 24) on the radio room rooftop air conditioning
unit remote (figure 27, item 2) until the word AUTO (figure 27, item 25) is displayed on the LCD (figure 27, item 6)
next to the word FLAP (figure 27, item 26) and the FLAP symbol (figure 27, item 27).
4.
To select the SWING flap setting, press the FLAP button (figure 27, item 24) on the radio room rooftop air condition-
ing unit remote (figure 27, item 2) until the word SWING replaces the word AUTO (figure 27, item 25) on the LCD
(figure 27, item 6) next to the word FLAP (figure 27, item 26) and the FLAP symbol (figure 27, item 27).
5.
To select a desired flap setting other than AUTO or SWING, press the FLAP button (figure 27, item 24) on the radio
room rooftop air conditioning unit remote (figure 27, item 2) until the FLAP symbol (figure 27, item 27) on the LCD
(figure 27, item 6) displays the desired setting.
6.
CLOSE the cover (figure 27, item 1) on the radio room rooftop air conditioning unit remote (figure 27, item 2).
ON TIMER OPERATION
1.
Perform the Initial Startup procedure in this work package.
2.
OPEN the cover (figure 27, item 1) on the radio room rooftop air conditioning unit remote (figure 27, item 2).
3.
To set the fan unit (figure 28, item 2) to start at a specific time setting, press the ON TIMER button (figure 27, item 28)
on the radio room rooftop air conditioning unit remote (figure 27, item 2). The current on timer setting (figure 27, item
5) and temperature setting (figure 27, item 11) will be displayed on the LCD (figure 27, item 6). The ON TIMER
symbol (figure 27, item 29) will start flashing.
NOTE
The ON TIMER symbol must be flashing to set the hour and minute start time. If the ON TIMER
symbol stops flashing, press the ON TIMER button.
4.
Press the HOUR button (figure 27, item 7) on the radio room rooftop air conditioning unit remote (figure 27, item 2)
until the desired start hour (figure 27, item 5) is displayed on the LCD (figure 27, item 6).
5.
Press the MINUTE button (figure 27, item 8) on the radio room rooftop air conditioning unit remote (figure 27, item 2)
until the desired start minute (figure 27, item 4) is displayed on the LCD (figure 27, item 6).
6.
Point the radio room rooftop air conditioning unit remote (figure 27, item 2) at the fan unit (figure 28, item 2) and press
the RESERV. button (figure 27, item 30) on the radio room rooftop air conditioning unit remote (figure 27, item 2) until
a beep is heard.
7.
Verify that the yellow TIMER LAMP (figure 28, item 3) is illuminated on the fan unit (figure 28, item 2).
8.
Perform the Mode Operation procedure in this work package.
9.
Perform the Fan Speed procedure in this work package.
10. Perform the Flap Setting procedure in this work package.
11. Perform the Temperature Setting procedure in this work package.
12. Press the ON/OFF button (figure 27, item 9) on the radio room rooftop air conditioning unit remote (figure 27, item 2).
13. CLOSE the cover (figure 27, item 1) on the radio room rooftop air conditioning unit remote (figure 27, item 2).
0082 00-37
|
||
|
||
