| Tweet |
Custom Search
|
|
|
|||||
|
|||||
 TM 55-1925-273-10-1
0087 00
NOTE
A 50-degree movement of the clutch shifter ring is required to fully engage or disengage the dog
clutch.
h.
Pull the dog clutch tool aft to disengage the dog clutch (figure 1, item 6).
i.
Tighten both wing nuts (figure 1, item 7) on the face of the shifter ring (figure 1, item 8).
4.
Select the desired speed by setting the two-speed control lever (figure 2, item 1) to the desired speed.
5.
Haul in (raise) or pay out (lower) by moving the RAISE-LOWER control (figure 2, item 2) to the desired position.
ANCHOR WINDLASS SHUTDOWN
1.
Verify that anchor windlass operations have ended and the anchors are properly stowed in their hawse pipes.
2.
Set both anchor windlass brakes (figure 1, item 4) by turning the anchor windlass brake handwheels (figure 1, item 5)
fully clockwise.
3.
Install the pelican hooks (figure 1, item 1) on the anchor chain (figure 1, item 2) and tighten the pelican hook turnbuck-
les (figure 1, item 3).
4.
Perform a thorough fresh water washdown of the anchor windlass.
5.
Notify unit maintenance to perform lubrication of the anchor windlass following each use.
6.
Perform the Central Hydraulic System Hydraulic Power Unit (HPU) Shutdown procedure (WP 0102 00).
END OF WORK PACKAGE
0087 00-6
|
|||||
|
|||||
