| Tweet |
Custom Search
|
|
|
||
 TM 55-1925-273-10-1
0090 00
NOTE
Do not screw in the dipstick when checking the oil level. Screwing the dipstick in will give a
false reading indicating that the level is higher than actually present.
c.
Remove the dipstick (figure 1, item 1) and check that the oil is within the acceptable range.
d.
If the oil level is reading low, add additional oil (MIL-PRF-2104).
e.
Install the dipstick (figure 1, item 1).
6.
Check the fuel level by removing the fuel cap (figure 1, item 3) on the fuel tank (figure 1, item 4). Add fuel as required.
STARTING THE PUMP
1.
Set the fuel tank isolation valve (figure 2, item 1) located under the fuel tank (figure 2, item 2) to the "O" (OPEN)
position.
2.
Set the engine throttle control (figure 3, item 1) to the START position.
1
Figure 2. Fuel Tank Isolation Valve
0090 00-3
|
||
|
||
