| Tweet |
Custom Search
|
|
|
||
 TM 55-1925-273-10-1
0091 00
7
ON
OFF
6
1
8
9
CONTROL
2
PANEL
3
5
4
Figure 15. Electric Mixer
k.
Remove the bowl (figure 15, item 4) from the bowl support (figure 15, item 5).
l.
Remove the attachment from the beater shaft (figure 15, item 3) by holding it near the top, raising slightly while
twisting counterclockwise, and sliding it downward.
3.
Follow the steps below for mounting the electric mixer accessories:
a.
Turn the thumbscrew (figure 15, item 8) counterclockwise so that it does not extend into the auxiliary drive socket.
b.
Remove the cover plate (figure 15, item 9) from the auxiliary drive socket.
c.
Insert the hub of the attachment into the auxiliary drive socket, rotating slightly until it slides into place against the
mixer housing.
d.
Turn the thumbscrew (figure 15, item 8) clockwise to lock the attachment in place.
4.
To shut down the electric mixer, perform the following steps:
a.
Set the ON-OFF power switch (figure 15, item 7) to the OFF position.
b.
At 120V distribution panel No. 1, set the MEAT SLICER & FOOD MIXER. circuit breaker (figure 5, item 4) to
OFF.
0091 00-18
|
||
|
||
