| Tweet |
Custom Search
|
|
|
||
 TM 55-1925-273-10-1
0091 00
WARNING
The heating elements are very hot. Use extreme care to avoid contact with the elements.
Allow water to cool before draining and cleaning the wells. Serious burns or scalding could
result.
c.
To empty the wells (figure 17, item 2), place suitably sized drain pans under the valves (figure 17, item 1). Open the
valves until all water has drained from the wells. After the water has drained, use a sponge or a clean rag to clear
the wells. Wipe dry with a clean soft cloth. Close the drain valves.
GARBAGE DISPOSAL
1.
At the 220/110V distribution panel, set the GARBAGE DISPOSAL. circuit breaker (figure 10, item 3) to ON.
WARNING
Never use your hand to check rotation of the flywheel or to remove foreign matter from the
garbage disposal. Use a stick or a similar object to turn the flywheel. Foreign matter should
only be removed using tongs or pliers. Use of hands could result in serious personal injury.
Never reach inside the garbage disposal while it is operating. Serious personal injury will
result.
2.
Perform the following steps for operating the garbage disposal:
a.
Turn on the cold water.
b.
Set the GARBAGE DISPOSAL SW to the ON position.
! CAUTION
Do NOT feed china, metal, rags, clamshells, etc. into the garbage disposal. Damage to the blades
will result.
! CAUTION
Do NOT put grease or oil in the garbage disposal. The drain may become clogged.
c.
Feed the food waste into the garbage disposal.
d.
Allow the garbage disposal to run two minutes after the grinding is complete to allow proper flushing of the
garbage disposal and the drain line.
0091 00-22
|
||
|
||
