| Tweet |
Custom Search
|
|
|
||
 TM 55-1925-273-10-1
0091 00
3
1
4
2
4
5
3
6
2
7
1
Figure 21. Milk Dispenser
! CAUTION
Do not stretch the tube. Pulling on the tube may cause the tube to pull loose from the milk
container, causing the milk container to drain.
f.
Lift the dispensing valve (figure 21, item 4) and feed tube from the milk container through the tube passage in the
dispensing valve (figure 21, item 4).
g.
Remove the polyethylene film covering the tube.
h.
Lower the dispensing valve (figure 21, item 4).
i.
Remove the plug from the feed tube.
NOTE
If the feed tube is too long, cut off 1/2 inch (13 mm) below the valve.
j.
Close the door and secure the latch (figure 21, item 3).
2.
Follow the procedures listed below for milk dispenser operation.
a.
Hold the container under the feed tube of the selected dispensing valve (figure 21, item 4).
b.
Raise the dispensing valve (figure 21, item 4) so that milk will flow into the container.
c.
When the container is filled to the desired level, lower the dispensing valve (figure 21, item 4).
0091 00-28
|
||
|
||
