| Tweet |
Custom Search
|
|
|
||
 TM 55-1925-273-10-1
0092 00
WARNING
Use of Vac output requires the use of remote controls not provided. Serious personal injury
or death could result.
c.
Set the OUTPUT/CONTACTOR ON switch (figure 2, item 3) to the ON position.
d.
Set the HIGH FREQUENCY switch (figure 2, item 4) to the OFF position.
e.
Set the AMPERAGE PANEL switch (figure 2, item 5) to the PANEL position.
f.
Set the AMPERAGE ADJUSTMENT control (figure 2, item 6) to the desired position.
g.
Set the START AMPERAGE ADJUSTMENT OFF-ON switch (figure 2, item 7) to the desired position.
h.
If the START AMPERAGE OFF-ON switch (figure 2, item 7) was set to the ON position, set the START AMPER-
AGE ADJUSTMENT control (figure 2, item 8) to the desired amperage.
WARNING
Wear leather gloves, dry insulating clothing, and a welding helmet with a properly fitting
lens when performing welding operations. Failure to comply could result in serious per-
sonal injury or death.
i.
Connect the work clamp to clean, bare metal at work piece.
j.
Select and obtain proper electrode; insert the electrode into the electrode holder.
k.
Press the POWER ON pushbutton (figure 2, item 9) to begin welding.
3.
To shut down the arc welder:
a.
Stop welding.
b.
Press the POWER OFF pushbutton (figure 2, item 10).
c.
At 440V power panel No. 5, set the WELDING MACHINE. circuit breaker (figure 1, item 1) to OFF.
0092 00-3
|
||
|
||
