| Tweet |
Custom Search
|
|
|
||
 TM 55-1925-273-10-1
0092 00
2.
To operate the drill press:
a.
Install the drill bit into the chuck (figure 4, item 1).
3
2
6
5
4
1
Figure 4. Drill Press
b.
To select correct drilling speed:
! CAUTION
Always ensure that the drill press has completely stopped before changing speeds. Damage to
the drill press could result.
(1)
Loosen the slide bar bolts.
(2)
Pull the cam handle (figure 4, item 2) toward the front of the drill press.
(3)
Open the top cover (figure 4, item 3).
(4)
Relocate the belts on the appropriate pulley rings for the desired spindle speed. Refer to the diagram attached
to the top cover (figure 4, item 3).
(5)
Close the top cover (figure 4, item 3).
(6)
Push the cam handle (figure 4, item 2) toward the motor.
(7)
Tighten the slide bar bolts.
0092 00-5
|
||
|
||
