| Tweet |
Custom Search
|
|
|
||
 TM 55-1925-273-10-1
0092 00
3.
Check that the tool rest (figure 5, item 4) has 1/16-inch clearance from the grinder wheel (figure 5, item 2).
4.
Set the ON-OFF switch (figure 5, item 1) to ON.
NOTE
Allow the bench grinder to reach full running speed before starting to grind.
5.
Hold the piece being ground firmly against the grinder wheel (figure 5, item 2) with a light but steady pressure.
! CAUTION
Excessive or sudden pressure slows grinding action, overloads the motor and puts dangerous
stresses on the wheel, gouging the wheel and causing rough grinding with reduced accuracy.
6.
Keep the tool rest (figure 5, item 4) adjusted to within 1/16-inch of the grinder wheel (figure 5, item 2).
7.
When finished, set the ON-OFF switch (figure 5, item 1) to OFF.
END OF WORK PACKAGE
0092 00-8
|
||
|
||
