Table 1. Operator Preventive Maintenance Checks and Services - continued

Custom Search

Table 1. Operator Preventive Maintenance Checks and Services - continued

TM-55-1925-273-10-2 Inland and Coastal Large TUG (LT) NSN 1925-01-509-7013 (EIC XAG) Manual

Table 1. Operator Preventive Maintenance Checks and Services - continued

TM 55-1925-273-10-2

0160 00

Table 1. Operator Preventive Maintenance Checks and Services (continued)

ITEM INTERVAL MAN-

ITEM TO BE

PROCEDURE

EQUIPMENT

NO.

HOUR

CHECKED OR

NOT READY/

SERVICED

AVAILABLE IF:

500 WATT XENON

SEARCHLIGHTS

WARNING

When hot, high pressures exist inside

the lamp, and it could explode. Handle

the lamp only in its protective cover,

and remove the protective cover before

energizing circuits. Wear eye

protection and gloves when handling

the lamp. Avoid direct exposure from

the direct and reflected radiations given

off by the lamp, even though the front

cover glass provides protection from

these radiations. Do not stand close to

the searchlight front cover glass when

the lamp is lighted. In the event of

lamp explosion the front cover glass

could break.

! CAUTION

Operation of the lamp with finger marks

or grease on the surface will cause

deterioration of the quartz tube.

Before

0.2

Lamp

Visually inspect lamp for blackening and

cracks in the quartz. If black or cracked,

refer to unit maintenance for repair.

500 WATT Xenon

Search Light

Front Cover Glass

0160 00-4