| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
TEST:
Test solenoid (refer to paragraph 3-115).
1.
REMOVE:
Open and secure battery hatch (refer to paragraph 3-154).
1.
Disconnect batteries (refer to paragraph 3-89).
2.
Note and tag wire and terminal location on solenoid.
3.
4.
Using 8 mm box wrench, remove two nuts (1), washers (2), and wires (3) from solenoid.
Using 11 mm box wrench, remove two nuts (4), washers (5), and wires (6) from solenoid.
5.
6.
Using 3/16 in. box wrench, 3/16 in. socket, and ratchet, remove two nuts (7), washers (8), and bolts (9) from mount
bracket.
7.
Remove solenoid (10) and discard.
REPLACE:
Aline holes in mounting bracket (11) of solenoid with holes in bulkhead.
1.
2.
Using 3/16 in. box wrench, 3/16 in. socket, and ratchet, reinstall two bolts (9), washers (8), and nuts (7).
Connect wires (3, 6) to terminals (refer to wiring diagram, page FO-1).
3.
4.
Using 8 mm box wrench, reinstall two washers (2) and two nuts (1) on solenoid.
3-230
|
||
|
||
