Replace/Repair Receiver Module RE-31326

Custom Search

REPLACEMENT

TM-55-1905-223-24-18-2 Landing Craft Utility (LCU) NSN 1905-01-154-1191 Basic Craft Part II Manual

FIGURE 3-46. Receiver Module, RE-31326 (Sheet 1 of 2).

TM 55-1905-223-24-18-2

3-46. Replace/Repair Receiver Module RE-31326.

(Figure 3-46)

This task covers:

a. Removal

b. Disassembly,

d. Assembly,

c. Repair

e. Replacement

INITIAL SETUP

Tools

Equipment Condition

Tool kit, general mechanic's,

Electrical power to tank level

5180-00-699-5273

indicator system turned OFF

at Panel L102. Tag switch

Materials/Parts

"Out of Service - Do Not

Operate."

Gasket P/N 31407, 28736, 16600 (3)

Meter P/N 15032

Dust and moisture seal boot

P/N 36805

Wirewound variable resistor

P/N RV4SAYSB252A

Power supply P/N 41415

Power transformer P/N 37031

Electrical receptacle connector

P/N 10626

Insulating tubing P/N 26657 (3)

Receptacle plug P/N 28107, 28109

Warning tags, Item 1, Appendix C

REMOVAL

a. Electrical receptacle connector (39) and receptacle plugs (45, 49).

(1) Tag and disconnect electrical receptacle connector (39) from electrical receptacle (38).

(2) Tag and disconnect receptacle plug (45) from electrical receptacle (44).

(3) Tag and disconnect receptacle plug (49) from electrical receptacle (48).

b. Remove four plain hex nuts (7), lockwashers (6), flat washers (5), and machine bolts (4) securing

mounting rack (55) to the support mount.

c. Remove mounting rack/receiver module from the support mount.

d. Position mounting rack on a clean flat surface.

e. Remove four machine screws (1), lockwashers (2), and flat washers (3) securing receiver module in

mounting rack (55).

3-194