Quantcast DISASSEMBLY - TM-55-1905-223-24-18-20658

Custom Search
TM 55-1905-223-24-18-2
Care must be taken while handling windows to prevent personal injury or equipment damage.
a. Clean off old adhesive sealant (1, Figure 3-184) and sealing tape (2) from around bulkhead opening.
b. Remove glazing gasket (6) from window frame (3).
c. Carefully remove (heat treated) window glass (5) from window frame (3).
If window glass is to be replaced disregard the following step.
d. Clean off old rubber strip (4) from window glass (5).
Repair at this level of maintenance is by -replacement of: sealing tape (2), adhesive sealant (1), glazing
gasket (6), (heat treated) window glass (5), and rubber strip (4).
a. Apply rubber strip (4) on window glass (5).
b. Install (heat treated) window glass (5) in window frame (3).
c. Insert glazing gasket (6) in window frame (3).
d. Apply sealing tape (2) and sealant adhesive (1) around bulkhead opening.
FIGURE 3-184. Repair Fixed-Window, Single Pane.


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.