| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-3
FIGURE 3-11. Oil Cooler/Filter - Filter Element Removed.
WARNING
Carefully remove the capscrew. The pressure regulator spring is under compression.
a.
Remove the regulator machine thread plug (5, Figure 3-1 ), spacer ring (4), and helical compression
spring. (3).
b.
Remove the regulator plunger (2) from the cooler support (1).
c.
Remove the cooler support (5, Figure 3-11) and cover (14) from the housing (12) by removing
lockwashers (6), hexagon head capscrews (7) and assembled washer screws (15).
d.
Remove the lube oil circle cover gaskets (8, 13) and retaining rings (1). Discard the gaskets.
e.
Remove and discard the preformed packings (2, 4). Be careful not to damage the fluid filterelement (3)
when removing packing.
f.
Remove the element (3) cooler core from the housing (12). Remove retainer plug (9), valve disk (10),
and helical compression spring (11) from the housing (12).
3-36
|
||
|
||
