| Tweet |
Custom Search
|
|
|
||
 Figure 2-11. Lubricating oil system piping diagram.
operations to be performed in the system, and the valve
b. Operation of Lubricating Oil System. Table 2-6
position necessary to accomplish the function. Table 2-10 is
shows the service, location, label description of each valve in
also keyed to figure 2-11.
the system, and is keyed to figure 2-11. Table 2-10 lists all
Table 2-10. Lubricating Oil System Control Value Positioning.
Operation
Open valve
Close valve
Procedure
To fill 460-gal. storage tank.
(19)
Fill storage tank through deck fill (F21,
(18)
(20)
tank, remove filling cap and connect filling
hose to deck fill. Oil level is indicated by a
sight glass on the tank. When tank is full,
remove hose and replace cap.
To fill hand service lubricating oil
(19)
Remove tank cap and open valve. When tank
Tank
(18)
(20)
is full, close valve and replace tank cap.
NOTE
The hand service lubricating oil tank
is vented through the tank cap.
To pump lubricating oil from a
(20)
(16)
Remove cap discharge connection and
storage tank to a container using
(17)
(15)
connect discharge hose. Press starter
standby pump.
(2)
(3)
button on lube oil standby pump. When
(1)
(11)
sight glass indicates that storage tank is
(14)
empty, stop standby pump and close all
valves. Disconnect discharge hose and
replace cap.
NOTE
Do not pump lubricating oil overboard.
2-29
|
||
|
||
