| Tweet |
Custom Search
|
|
|
||
 LUBRICATION ORDER
LO 55-1905-217-12-3
30 JULY 1971 (Supersedes L055-1905-217-12-3, Dated 18 OCTOBER 1968)
LANDING CRAFT, MECHANIZED: STEEL: DIESEL POWER DRIVEN,
74 FT. LG. PROPULSION UNIT: (DETROIT DIESEL MODELS
12005A AND 12006A) HULL NOS. LCM 8500 THRU
LCM 8560 AND HULL NOS. 8580 THRU 8619
Reference: TM55-1905-217-12, L055-1905-217-12-1 and -2. C9100-IL.
Port propulsion unit shown-starboard propulsion unit
Intervals are based on normal hours of operation.
opposite.
Adjust to compensate for abnormal operation and
severe conditions.
Clean fittings before lubricating.
During inactive periods sufficient lubrication must be
Clean parts with SOLVENT, dry-cleaning, or with OIL,
performed for adequate preservation.
fuel, Diesel. Dry before lubricating.
Lubricate points indicated by dotted arrow shafts on both
Drain crankcase when hot. Fill and check level.
sides of propulsion unit.
LUBRICANT
INTERVAL
INTERVAL
LUBRICANT
Crankcase Level Gage
(Check level)
Engine Fill Cap
CAUTION: When OES
(Clean)
Oil is used the level
will be checked more often.
Transmission Breather
Throttle Control
(Clean)
Governor Link
Tachometer Drive
Power Takeoff Clutch
(2 fittings)
Release Lever And
Link Pins
(See note 6)
Shift Control
(2 fittings) (Applies
to hull No's 8500
Power Takeoff Clutch
thru 8519 only)
Shaft Bearing
(2 fittings)
Transmission Fill Cap
Power Takeoff Shaft
Clean (See note 5)
(2 fittings)
Throttle Control Shaft
Power Takeoff Clutch
(4 fittings)
Throwout Bearing
Transmission Oil
Engine Oil Filter
Strainer
(See note 3)
(Clean-see note 2)
Transmission Oil
Filter
Transmission Oil Level
(See note 3)
(Check-add oil as required
to full mark-see
Engine Crankcase
Drain
|
||
|
||
