| Tweet |
Custom Search
|
|
|
||
 TB 600-1
PASS
FAIL
*a.
Connect the drive coupling to the first section of ground rod and drive the
first section of ground rod into the ground far enough so that the second
section can be connected and driven into the ground. Remove drive
____
____
coupling.
*b.
Connect the second section of ground rod to the first ground rod using an
adapter, connect the drive coupling to the second section and drive the
second section of ground rod into the ground far enough so that the third
____
____
and final section can be attached and driven into the ground. Remove drive
coupling.
*c.
Slide the ground clamp over the third section of ground rod. Connect the
drive coupling to the third section of ground rod and connect the third
____
____
section of ground rod using an adapter and drive the third section into the
ground, leaving not more than one foot extending above the ground.
____
____
*d.
Connect the other end of the ground cable to the ground clamp and tighten
the bolt securely.
*11.
Smoking. No smoking or open flame during entire test.
____
____
*12.
Jewelry. All jewelry will be removed. (Wedding bands and hard to remove rings
may be taped.)
____
____
*13.
Fire Extinguisher. A fire extinguisher will be placed near the generator set site.
GO
NO GO
CHECK ONE
REASONS FOR NO GO/REMARKS (Briefly explain)_________________________________________________________________
___________________________________________________________________________________________________________
___________________________________________________________________________________________________________
___________________________________________________________________________________________________________
_______________________
Scorer's Signature and Date
Change 3 H-33
|
||
|
||
