| Tweet |
Custom Search
|
|
|
||
 0008 00
TM 11-5895-1847-12&P
2.
Check/Set INMARSAT-C transceiver dip switches. Dip switches should be set as depicted in illustration below.
2C008-2
3.
After switches are set, install bottom cover (2) on INMARSAT-C transceiver (1).
3
2
1
DIP SWITCH
ACCESS
2C008-1
a.
Align bottom cover (2) with mounting holes on bottom of the INMARSAT-C transceiver (1).
b.
Install eight screws (3) and tighten.
INSTALL INMARSAT-C TRANSCEIVER
1.
Install INMARSAT-C transceiver (1). (WP 0121 00)
NOTE
Guard cover is supplied with a new transceiver.
2.
Install guard cover over alarm button.
a.
Peel paper from adhesive pad on back of guard cover.
b.
Stick alarm cover on INMARSAT-C over alarm button.
COMMISSIONING THE INMARSAT-C TRANSCEIVER
NOTE
The INMARSAT-C transceiver must be commissioned after initial installation
or replacement.
The INMARSAT-C transceiver is registered by serial number to the vessel it is being
installed on. Removing an INMARSAT-C transceiver from one vessel to another vessel
for installation is not authorized.
1.
Turn on the power to the parallel printer.
0008 00 2
|
||
|
||
