| Tweet |
Custom Search
|
|
|
||
 TM 11-5895-1847-12&P
OPERATOR AND UNIT MAINTENANCE
LCU 2000 GLOBAL MARITIME DISTRESS AND SAFETY SYSTEM
OPERATION UNDER USUAL CONDITIONS
INITIAL SETUP:
Personnel Required
Seaman 88K
PERFORM INITIAL SETUP OF INMARSAT-C TRANSCEIVER
UNPACK INMARSAT-C TRANSCEIVER
1.
Remove INMARSAT-C transceiver from shipping box.
a.
Open top of shipping box.
b.
Remove packing material.
c.
Remove INMARSAT-C transceiver.
NOTE
Remove tape embossed with serial number prior to removing Inmarsat-C transceiver from
protective plastic bag and safekeep for use during initial setup.
2.
Remove INMARSAT-C transceiver from protective plastic bag.
3.
Verify serial number embossed on tape with the serial number stamped on the data plate on bottom of
INMARSAT-C transceiver.
CHECK/SET INMARSAT-C TRANSCEIVER DIP SWITCHES
NOTE
Dip switches are factory preset and may need adjustment prior to installation of the
INMARSAT-C transceiver.
3
2
1
DIP SWITCH
ACCESS
2C008-1
1.
Remove bottom cover (2) from INMARSAT-C transceiver (1).
a.
Remove eight screws (3) that secure the bottom cover (2) to the INMARSAT-C transceiver (1).
b.
Remove bottom cover (2).
0008 00 1
|
||
|
||
