| Tweet |
Custom Search
|
|
|
||
 0036 00
TM 11-5895-1847-12&P
18. Most functions are selected or deselected by designating upper (capital) or lower (small) case characters by
pressing the "ACCEPT" key or "REJECT" key at relevant characters, respectively.
19. The "<" and ">" keys move the printing head leftward or rightward to skip over functions or items which you do
not wish to change.
20. To escape from the user setting mode (at this stage), place the printing head above "G" and press either the ENT
key or the ACCEPT key. The message "Nav. print ready." is displayed, indicating control is returned to the
receiving mode.
Nav. print ready.
2C036-7
NOTE
Menus D,E, and F are not for parameter setting but for activating the printer for use as a
data logger.
Any message received during user setting (lock lamp illuminates) is stored in the memory
and will be printed out immediately after "NAV. PRINT READY." is printed.
21. The MENU-A: SET STATION allows you to select what stations you wish to receive. In order to select
stations, you have to switch the reception mode to MANUAL in Menu-C: Set function. If you attempt to
proceed the SET STATION menu while in the AUTO station selection mode, the receiver will print the
following alert message.
Change to manual selection mode and
try again.
2C036-8
22. To change the station selection, go to SET FUNCTION MENU-C and switch to MANUAL selection mode.
23. Move the printing head to "A", then press either the ENT key or the ACCEPT key. The following is printed.
*
printing head
current setting
A b C D e f G H I j K L M ESC
-------------------------Set station-----------------------
Selected station = capital letter
ESC: ESCAPE
2C036-9
24. The characters in the top line of the menu represent station ID's, and may be in upper or lower case depending on
if C, D, G, H, I, K, L, and M are selected for reception, and stations B, E, F, and J are eliminated from reception.
25. To select or deselect a station, place the printing head above the letter (station ID) and press ACCEPT or REJECT
depending on whether you want to select or deselect the station.
0036 00 10
|
||
|
||
