| Tweet |
Custom Search
|
|
|
||
 TM 11-5895-1847-12&P
0155 00
4.
Punch hole into end of stainless steel grounding strap (4) corresponding with the size of the ground stud on the
equipment. Use punch and die set.
5.
Punch hole into opposite end of grounding strap (4) corresponding with the size of tapped hole (5) drilled in step
two. Use punch and die set.
6.
Expose bare metal immediately around tapped hole (5) using grinder to remove paint and primer. Use drill and
grinder attachment.
7.
Apply anti-sieze onto exposed metal.
8.
Insert bolt (1) through lock washer (2), washer (3), grounding strap (4), and into threaded hole (5).
9.
Tighten bolt (1).
10. Apply Form-a-Gasket 2 over bolt (1), washers (2), and end of grounding strap (4).
11. Mount opposite end of ground strap onto equipment.
12. Apply Form-a-Gasket 2 over bolt (1), washers (2) and end of grounding strap (4).
END OF WORK PACKAGE
0155 00 3/4 blank
|
||
|
||
