| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
INSTALL
1.
Butt end of new cable (7) to end of old cable (8) at injection pump. Wire cable ends together securely using solid
wire.
2.
Pull new cable (7) into position at control head assembly.
3.
Unwire new cable (7) from old cable (8).
4.
Reinstall control head assembly (refer to paragraph 3-34).
5.
Screw stop nut (4) onto cable.
Screw pivot (2) onto cable.
6.
7.
Using screwdriver reinstall throttle cable clamp (5).
Install cable pivot (2) into throttle control (3).
8.
9.
Adjust throttle control (3) (refer to paragraph 3-37).
Using pliers install new cotter pin (1) securing cable pivot (2) to throttle control (3).
10.
11.
Flare end of cotter pin (1).
12.
Close engine hatches.
3-82
|
||
|
||
