CONTROL CABLE AND LINKAGE ADJUSTMENT INSTRUCTIONS (TRANSMISSION AND ENGINE)

Custom Search

INSTALL-cont.

TM-5-1940-277-20 Boat Bridge Erection Twin Jet Aluminum Hull MODEL USCSBMK1 (1940-01-105-5728) MODEL USCSBMK2 (1940-01-218-9165) Manual

ADJUST CONTROL LINKAGES AT TRANSMISSION AND INJECTOR PUMP

TM 5-1940-277-20

TM 1940-20/2

3-37. CONTROL CABLE AND LINKAGE ADJUSTMENT INSTRUCTIONS (TRANSMISSION AND ENGINE)

TOOLS: Long Nose pliers

7/16 inch Open End Wrench

PARTS/MATERIALS: Cotter Pins

REMOVE:

Open access panel under control console (refer to paragraph 3-154).

Remove control head assembly (refer to paragraph 3-34).

ADJUST CONTROL LINKAGES AT CONSOLE:

Using 7/16 inch open end wrench loosen nut (1) beneath cable pivots (2).

Rotate cable pivot (2) to adjust cable length.

Reinstall control head into console (refer to paragraph 3-34, steps 6 thru 13).

Close access control panel (refer to paragraph 3-154).

3-76