| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
TOOLS: 1/2 inch Box Wrenches
Long Nose Pliers
9/16 inch Box Wrench
9/16 inch Socket
Flat Tip Screwdriver
13 mm Box Wrench
PARTS/MATERIALS: Steering Cable
Two Feet of Solid Wire (Recommend 18 Gage)
PERSONNEL REQUIRED: Three
Set master switch to "OFF". Shock or burns may result.
CAUTION
The cable should not be bent sharply in any direction. Severe cable damage may result.
REMOVE:
1.
Remove steering wheel assembly (refer to paragraph 3-44).
2.
Using two wrenches remove three nuts (1), washers (2) and bolts (3) securing steering support ring (4) to console.
3.
Using two wrenches remove four nuts (5) and bolts (6) holding steering gear carriage (7) to gear slide casing (8).
4.
Remove steering gear carriage (7).
5.
Using two wrenches remove two nuts (9) washers (10) and bolts (11) holding gear slide (12) to gear slide casing
(8).
Remove gear slide (12) from gear slide casing (8).
6.
Using wrench remove self-locking nut (13) securing gear slide (12) to cable end (14).
7.
Remove end cap (15) cable bracket top and bottom (16).
8.
Remove cable end (14) from gear slide (12).
9.
3-87
|
||
|
||
