| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
TOOLS: Non-metallic Hammer
Mechanical Puller
Snap Ring Pliers
3/32 inch Hex Key Wrench (Allen)
Two 7/16 inch Box Wrenches
15/16 inch Socket
Long Nose Pliers
PARTS/MATERIALS: Steering Gear Carriage Assembly
Set master switch to "OFF". Severe burns and shocks may result.
REMOVE:
1.
Open access panel under control console (refer to paragraph 3-154).
Remove steering wheel assembly (refer to paragraph 3-44).
2.
Using two 7/16 inch box wrenches remove three nuts (1), washers (2) and bolts (3) securing steering support ring
3.
(4) to console.
Using two 7/16 inch box wrenches remove four nuts (5) and bolts (6) securing steering gear carriage assembly (7)
4.
to gear slide casing (8).
Remove steering gear carriage assembly (7) and plastic sleeve (9).
5.
INSTALL:
Install new steering gear carriage assembly (7) into console.
1.
Using two 7/16 inch box wrenches reinstall four bolts (6) and nuts (5) securing steering gear assembly (7) to gear
2.
slide casing (8).
3.
Using two 7/16 inch box wrenches reinstall three bolts (3), washers (2) and nuts (1) securing steering support ring
(4) to console.
Reinstall steering wheel assembly (refer to paragraph 3-44).
4.
3-90
|
||
|
||
