| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
TOOLS:
9/16 inch Open End Wrench
9/16 inch Socket
3/4 inch Open End Wench, 2 each
PERSONNEL REQUIRED: Two
ADJUST
NOTE
The boat must be out of water on cradle or hardstand to perform this service.
1.
Open and secure hydrojet hatches (refer to paragraph 3-154).
Open steering unit hatches (refer to paragraph 3-28).
2.
Turn steering wheel (1) until scoop position indicator (2) is on zero.
3.
Holding nut (3) with 9/16 inch wrench, remove nut (4), lockwasher (5) and flat washer (6) using socket and ratchet.
4.
Pull linkage pin (7) out of hole in inner steering arm (8).
5.
3-92
|
||
|
||
