| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
WARNING
o not touch hot exhaust system components with bare hands.
Allow exhaust to cool. Failure to comply may result in injury to
personnel.
Port Engine Exhaust Bellows (8) Removal:
NOTE
Keep hose raised above engine level to ensure there is no fluid
spill.
2.
Loosen clamp (1) securing hose (5) to exhaust elbow (2) and remove hose (5).
3.
Loosen clamp (3) securing exhaust elbow (2) to exhaust pipe (4).
4.
Loosen clamps (6) and (9) securing bellows (8) to exhaust elbow (2) and exhaust pipe (7).
5.
Remove exhaust elbow (2) from exhaust pipe (4) and bellows (8).
6.
Remove clamps (6) and (9), and bellows (8) from exhaust pipe (7).
Starboard Engine Exhaust Bellows (16) Removal:
NOTE
Keep hose raised above engine level to ensure there is no fluid
spill.
7.
Loosen clamp (11) securing hose (13) to exhaust elbow (14) and remove hose (13).
8.
Loosen clamp (12) securing exhaust elbow (14) to exhaust pipe (10).
9.
Loosen clamps (15) and (17) securing bellows (16) to exhaust elbow (14) and exhaust pipe (18).
10.
Remove exhaust elbow (14) from exhaust pipe (10) and bellow (16).
11.
Remove clamps (15) and (17), and bellows (16) from exhaust pipe (18).
INSTALL:
Port Engine Exhaust Bellows (8) Installation:
1.
Place bellows clamps (6) and (9) on bellows (8) and align so that clamp nuts will face toward engine
compartment when bellows is installed.
2.
Install engine exhaust bellows (8) on exhaust pipe (7).
3.
Install exhaust elbow (2) in engine exhaust bellows (8).
4.
Tighten bellows clamps (6) and (9) on exhaust engine bellows (8).
5.
Secure exhaust elbow (2) to exhaust pipe (4) with clamp (3). Tighten clamp (3)
6.
Install water intake hose (5) on exhaust elbow (2) with clamp (1). Tighten hose clamp (1).
Starboard Engine Exhaust Bellows (16) Installation:
7.
Place bellows clamps (15) and (17) on exhaust bellows (16) and align so that clamp nuts will face
toward engine compartment when bellows is installed.
8.
Install engine exhaust bellows (16) on exhaust pipe (18).
9.
Install exhaust elbow (14) in engine exhaust bellows (16).
10.
Tighten bellows clamps (15) and (17) on engine exhaust bellows (16).
11.
Secure exhaust elbow (14) to exhaust pipe (10) with clamp (12). Tighten clamp (12).
12.
Secure water intake hose (13) on exhaust elbow (14) with clamp (11). Tighten hose clamp (11).
13.
Close engine hatches (refer to paragraph 3-154).
Change D
2
|
||
|
||
