| Tweet |
Custom Search
|
|
|
||
 TM5-1940-277-20
TM 1940-20/2
TOOLS: 10 mm Box Wrench
11 mm Box Wrench
1/2 inch Box Wrench
9/16 inch Socket
14 mm Box Wrench
PARTS/MATERIALS: Battery Cable
Wire Ties (Item 12, Appendix C)
Insulating Plastic Spray Paint (Item 13, Appendix C)
Grease (Item 1, Appendix C)
REMOVE:
Set master switch to "OFF".
q
Disconnect batteries.
q
1.
Open and secure engine hatches (refer to paragraph 3-154).
2.
Open and secure battery hatch (refer to paragraph 3-154).
Disconnect batteries (refer to paragraph 3-69).
3.
NOTE
Battery cables may be fastened to other cables and harnesses with wire ties. Battery
cables have a lettered plastic clip at each end for identification. Remove and save this
clip for use with new cable.
4.
Note battery cables as listed.
To
Battery (+)
L
Battery (-)
Master switch
A&H
Battery (+) post
Emergency link solenoid
E&M
Battery (+) post
Starter B+ terminal
Master switch
B&C
Slave receptacle (+) terminal
Master switch
D
Starboard starter R -
Battery (-) post
G
Slave receptacle (-) terminal
Battery (-) post
J
Port starter R-
Slave receptacle (-) terminal
K
Starter (-)
F
Starter (-)
3-194
|
||
|
||
