Tweet |
Custom Search
|
|
|
||
TM 5-1940-277-20
TM 1940-20/2
5.
Remove connector nut (9) from electrical plug (10) and slide aft on cable (11).
6.
Using screwdriver remove three screws (12), lockwashers (15) and flat washers (14) from alternator
cover (16).
7.
Slide alternator cover (16) aft over cable (11) to expose wire connections.
8.
Note and tag terminal locations of four wires from alternator harness.
9.
Using 7/16-inch box wrench remove two nuts (17 and 18) from terminals and disconnect wires.
3-201
|
||