| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
1
2
1
3
5
4
6
7
8
9
5
8
6
7
FUEL INJECTOR LINE INSTALLATION
1.
Hand-tighten fuel lines (1) on fuel injectors (2) and fuel injection pump (3).
2.
Install six vibration isolators (5) on fuel lines (1), tube braces (9), (4) with three support brackets (6),
six washers (7), and screws (8). Tighten screws (8) to 53 lb-in. (6 Nm) using 3/8-inch wrench.
3.
Check all fuel lines (1) for proper clearance.
4.
Tighten fuel lines (1) on fuel injectors (2) and fuel injection pump (3) to 22 lb-ft (30 Nm) using
3/8-inch wrench.
5.
Bleed fuel lines (refer to paragraph 3-64).
6.
Connect battery ground cable (refer to paragraph 3-90).
7.
Close engine hatches.
3-262.4
Change 2
|
||
|
||
