| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
2.
Using wrench disconnect oil pick-up line (1) from base of pump.
3.
Loosen bolt (2) on sump pump bracket using socket.
4.
Lift pump (3) out of bracket.
INSTALL:
1.
Position pump (3) in bracket with spout pointing away from engine.
2.
Connect oil pick-up line (1) to base of pump and position pump so no sharp bends are in oil line.
3.
Using socket tighten bracket bolt (2) to secure pump.
4.
Tighten oil pick-up line (1) to base of pump using wrench.
5.
Wipe up oil with rag.
NOTE
For starboard sump pump replacement only, replace bouyancy
flotation material (refer to paragraph 3-152).
6.
Close engine hatches.
3-279
|
||
|
||
