| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
ASSEMBLE:
1.
Install air filter (11) and cover (5).
2.
Install three washers (10) and nuts (9) and tighten using 7/16 inch socket.
3.
Replace silencers (8) in lower portion of filter cover (5) and aline holes.
4.
Install washers (7) and bolts (6) and tighten using 5/16 inch wrench.
INSTALL:
NOTE
This procedure covers two different types of air filters used on
different engines. Step one and two applies to the MK1 and MK2
w/Sabre engine. Step three applies to the MK2 w/Cummins
engine.
1.
Install air filter assembly (2) to turbocharger (3). Connect hose between air cleaner and
turbocharger and tighten hose damp (1) using flat tip screwdriver.
2.
Install bolt (4) thru filter assembly into cover mounting bracket.
3.
Install air cleaner (13) on air inlet of turbocharger and tighten clamp (12) to 71 lb-in. (8 Nm).
4.
Close engine hatches.
Change 2
|
||
|
||
