| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
Using socket and wrench remove two nuts (1), four washers (2) and two bolts (3) securing starboard (4) and
1.
port (5) anodes to keel (6).
2.
Discard old anodes.
Clean corrosion from surfaces of keel (6) to bare metal using degreasing solvent and steel wool. Wash with soap
3.
and water solution and dry.
INSTALL:
1.
Place starboard anode (4) alongside keel (6) and aline mounting holes.
Install washers (2) and two bolts (3) and insert thru starboard anode (4) and keel (6).
2.
Fit port anode (5) to keel (6) and push bolts (3) thru holes.
3.
Install two washers (2) and nuts (1) and tighten nuts (1) using wrench and socket.
4.
3-317
|
||
|
||
