OUT OF WATER ENGINE OPERATION (MK2)

Custom Search

IMAGE

TM-5-1940-277-20 Boat Bridge Erection Twin Jet Aluminum Hull MODEL USCSBMK1 (1940-01-105-5728) MODEL USCSBMK2 (1940-01-218-9165) Manual

IMAGE

TM 5-1940-277-20

TM 1940-20/2

3-156. OUT OF WATER ENGINE OPERATION (MK2)

TOOLS: None

PARTS/MATERIALS: Water Hose Assembly

PERSONNEL: Two to three (one to operate engines and one to cool each engine from beneath boat).

Cooling engine during out of water operation requires personnel to work directly

under boat. Take special precautions to ensure boat is securely supported.

NOTE

Procedure is same for both engines.

Start engine (refer to TM 5-1940-277-10).

Spray water on front and rear keel coolers (1) from beneath boat. Make sure spray hits both keel coolers.

NOTE

Continue to spray water until engine is stopped.

Observe water temperature gage to make sure overheating does not occur.

Stop engine when check is completed.

3-346