| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
REMOVE:
NOTE
Procedure for replacement of both starboard and port aft cleats are the same.
1.
Remove aft cockpit (refer to paragraph 3-27).
Lift two wedge blocks out of position and place aside (refer to paragraph 3-152).
2.
3.
Tilt blocks (55) and (56) toward boat centertine, lift out, and place aside (refer to paragraph 3-152).
NOTE
Buoyancy blooks (58) and (59) are removed for starboard aft cleat.
Using 13/16 inch socket and ratchet, remove two nuts (1), two washers (2), and metal plate (3) from under aft
4.
cleat (4).
Remove two screws (6) from top of aft cleat (4).
5.
Lift aft cleat (4) from gunwale (5).
6.
INSTALL:
Insert aft cleat (4) into gunwale (5).
1.
Install two screws (6) in top of aft cleat.
2.
Install metal plate (3), two washers (2), and two nuts (1) and tighten using 13/16 inch socket and ratchet.
3.
Replace buoyancy blocks and wedge blocks (refer to paragraph 3-152).
4.
Install aft cockpit (refer to paragraph 3-27).
5.
3-349
|
||
|
||
