| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
______________
REPLACEMENT
1. Loosen hose clamps (1).
2. Remove hoses (2).
3. Remove engine lube oil hoses (4).
4. Remove screws and washers (3).
NOTE
O-Ring is to be discarded and new
O-Ring installed.
5. Remove assembly (6).
6. Remove O-Ring (5).
7. Install new O-Ring (5).
8. Install assembly (6).
9. Install washers and screws (3).
10. Install engine lube oil hoses (4).
11. Install cooling water hoses (2).
12. Tighten hose clamps (1).
13. Fill the cooling system with coolant (a fifty-fifty mixture of clean, fresh water and permanent anti-freeze).
14. Fill engine lube oil system (LO5-2010-205-12).
15. Start engine and check for leaks.
4-18
|
||
|
||
