| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
4-13. REPLACE COOLER ASSEMBLY (OIL)
This Task Covers: a. Inspect b. Replacement
_____________
INITIAL SETUP
Tools Required
Equipment Required
Tool Kit, General
Engine Shutdown (para 2-11).
Mechanics (Appendix B,
Battery Disconnected (para 4-58).
Item 1)
Materials/Parts Required
Personnel Required
Cotton Rags (Appendix E,
1 person
Item 3)
Permanent Antifreeze
(Appendix E, Item 4)
Packing, Preformed P/N 2M9780
________
INSPECT (Figure 4-3.) Look for restrictions in oil passages of oil cooler. If oil cooler has a restriction, oil cooler bypass
valve in oil filter base will open. This will cause flow of oil to go around oil cooler. Oil temperature will be higher than
normal when engine is running. Oil pressure of the engine will become low if oil cooler has a restriction.
Figure 4-3. Cooler Assembly (Oil)
4-17
|
||
|
||
