REPLACEMENT - TM-5-2010-205-140201

Custom Search

Figure 5-12. Governor Pump Assembly

TM-5-2010-205-14 Propelling Unit Outboard NSN 2010-01-251-2227 Manual

REPLACE FLYWHEEL ASSEMBLY

TM 5-2010-205-14

12. Turn crankshaft clockwise until bolt can be installed in timing gear and is in the center of timing hole.

13. Remove lines (11).

14. Remove bolts (12).

NOTE

Governor and fuel injection pump will be removed as an assembly.

15. Remove governor.

16. Install fuel injection pump housing and governor as a unit onto the engine.

17. Install bolts (12).

18. Install tachometer drive shaft (9).

19. Tighten drive shaft to 110 lb-ft.

20. Remove 5/16 x 2 1/2 inch bolt from timing hole.

21. Install plug (10).

22. Remove timing pin.

23. Install plug (1).

24. Install lines (11).

25. Install tachometer cover (6).

26. Install cover nuts (5).

5-32