| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
5-17.
REPLACE FLYWHEEL ASSEMBLY
This Task Covers: a. Inspect b. Replacement
INITIAL SETUP
Tools Required
Equipment Conditions
Tool Kit, General Mechanics
Engine Shutdown (para 2-11).
(Appendix B, Item 1)
Battery Disconnected (para 4-58).
Hydraulic Pump Removed
Starter Removed (para 4-44).
Materials/Parts Required
Personnel Required
Cotton Rags (Appendix E,
2 Persons
Item 3)
Gasket Sealant (Appendix E,
Item 9)
Flywheel Assembly P/N 7W1534
INSPECT
1.
Inspect for loose bolts (2).
2.
Inspect for damage.
REPLACEMENT
1.
Remove bolts (2).
2.
Remove flywheel (1).
NOTE
Make sure gasket sealant is put on bolt threads before
reinstalling.
Oil leaks can result if sealant is not used.
CAUTION
Before installing new flywheel, check the thickness
at the bolt holes. This thickness must be the same
as the old flywheel.
5-33
|
||
|
||
