| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
20.
Install thrust bearing for the No. 4 main.
NOTE
Make sure timing mark on the crankshaft gear is in alignment with timing
gear on camshaft.
21.
Put crankshaft in position in block.
CAUTION
Crankshaft end play is controlled by No. 4 main bearing. End play with
new bearings is .003 to .010 inch. Maximum end play with used
bearings is .014 inch.
22.
Check end play of crankshaft with dial indicator.
Figure 6-9. Crankshaft Assembly
6-29
|
||
|
||
