| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
10.
Remove piston (3) and U-cups (4). Remove O-ring (13).
11.
Remove spacer (5) by sliding off piston rod (6).
12.
Slide head assembly (8) down and off piston rod (6).
13.
Remove O-ring (10) and back-up ring (11).
14.
Remove "poly pak" (12) and rod wiper (7).
15.
Install poly pak (12) and rod wiper (7).
16.
Install O-ring (10).
17.
Install back-up ring (11).
18.
Slide head assembly onto rod (6).
19.
Slide spacer (5) onto rod.
20.
Install O-ring (13).
21.
Install U-cups (4).
22.
Install piston (3).
23.
Install nut (2) onto rod (6).
24.
Install rod assembly into cylinder (1).
25.
Install end caps (9).
26.
Install cylinder assembly (7), Figure 5-29.
27.
Install pin (2).
28.
Install and tighten bolts (1).
29.
Install pin (5).
30.
Install bolts (6).
31.
Install hoses (3).
6-40
|
||
|
||
