| Tweet |
Custom Search
|
|
|
||
 TM 5-2805-261-13
3-13. GEARCASE INSPECTION AND LUBRICATION
This task covers:
Inspecting and lubricating gearcase
INITIAL SETUP :
Tools:
Equipment Condition:
Gear oil
Motor OFF
Materials/Parts:
GO MIL-L-2105
Clean, lint-free rag
Personnel Required:
Approximate Time Required (minutes):
1 operator
15
LOCATION/ITEM
ACTION
REMARKS
INSPECTION
1. Gearcase
Inspect.
Look for cracks, loose screws and leaks.
2. Oil level (1)
Remove plug.
Check to be sure lubricant is up to oil level.
LUBRICATION
1. Oil level plug (1)
Remove.
2. Drain/fill plug (2)
Remove.
Figure 3-5. Gearcase lubrication
3. Lubricant container (3)
Insert tip in drain/fill plug.
Squeeze container, forcing lubricant into gearcase
until lubricant appears at oil level. An empty gearcase
will use approximately 14 oz (413 cc) of lubricant.
4. Lubricant container (3)
Remove.
When you remove the container, quickly install the
drain/fill plug (2) or lubricant will leak out.
5. Oil level plug (1)
Install.
6. Excess lubricant
Wipe off with clean, lint-
free rag.
3-16
|
||
|
||
