| Tweet |
Custom Search
|
|
|
||
 TM 5-2805-261-13
LOCATION/ITEM
ACTION
REMARKS
4-15. MANUAL STARTER DISASSEMBLY/CLEANING/INSPECTION/REASSEMBLY
- continued
WARNING
Drycleaning solvent, P-D-680,
used to clean parts is poten-
tially dangerous to personnel
and property. Avoid repeated
and prolonged skin contact
by wearing rubber or
nonporous g loves when
handling the solvent or
material wet with dryclean-
ing solvent. Wash hands im-
mediately after exposure
with soap and water and use
a lanolin based skin cream to
prevent skin drying. Do not
use near open flame or ex-
cessive heat. Flash point of
solvent is 100 (38 ). Do
F
C
not work with solvent in a
closed room. Be sure there is
good ventilation or the solvent
vapors will build up in the air
and become a poisonous
mixture which can cause
physical injury or even death.
CLEANING AND
INSPECTION
1.
Components
Wash in solvent and dry with
lint-free rags.
2.
Spring (8)
Inspect for broken end
loops and weak tension.
3.
Pawl (2)
Check for wear.
4.
Rope (4)
Replace if frayed.
5.
Pulley (7) and housing
Examine for sharp edges
File and polish smooth.
(17)
and rough surfaces.
6.
Components
Replace any components
that are worn or broken.
REASSEMBLY
1. Spring winder (392093)
Position base
tightly in vise.
4-11
|
||
|
||
