| Tweet |
Custom Search
|
|
|
||
 TM 5-2805-261-13
LOCATION/ITEM
ACTION
REMARKS
4-16. A RMATU R E PLATE REMOVAL/D ISASSEMB LY/ASSEMB LY/INSTA LLATION - continued
4. Coil and laminations (13)
Installation on armature
plate.
5. Bearing (12)
Install on retainer plate (9).
Lubricate bearing with GAA grease before installation.
6. Retainer plate (9)
Attach to support plate (5).
7. Retainer plate (9) and
Attach to crankcase with
Tighten four screws (11) to a torque of 8-10 lb ft (11-14
support plate (5)
four screws (11).
N.m).
8. Bearing (12)
Place on retainer plate.
9. Armature plate (8)
Place in position over crank-
Be careful not to damage breaker arms.
shaft, retainer plate, and
bearing.
10. Bearing (12)
Use a needle-nose pliers and
compress the bearing.
11. Armature plate
Locate over bearing.
12. Armature plate
Aline armature plate holes
with holes in support plate.
13. Screws (7)
Install.
Tighten screws to a torque of 8-10 lb ft (11-14 N.m).
INSTALLATION
1. Ignition coils (6)
Install.
2. Spring connecting cam
Install.
and link assembly to
control lever
4-20
|
||
|
||
