| Tweet |
Custom Search
|
|
|
||
 TM 5-2805-261-13
LOCATION/ITEM
ACTION
REMARKS
5-14. GEARCASE DISASSEMBLY/ASSEMBLY - continued
17. Cotter pin (24) and
Remove from shifter lever
shift rod pin (25)
(7). Remove shift rods (26)
from gearcase.
18. Seal (27)
Remove from crankcase half.
NOTE
Use an internal bearing puller
and remove (38), (37), (36),
(35), (34).
19. Bearing (28) and
Remove from upper
pinion washer (29)
gearcase half.
20. Thrust bearing (30)
Remove.
and pinion washer (31)
21. Pinion bearing
Remove.
assembly (32)
22. Seals (33)
Remove.
23. Bearing (34)
Remove.
24. Bushing (35)
Remove.
25. O-ring (36) and
Remove.
gasket (37)
ASSEMBLY
1.
Gasket (37) and
Insert in exhaust housing.
O-ring (36)
2.
Bushing (35)
Install in exhaust housing
Use a suitable mandrel to drive bushing into place.
on top of O-ring and bushing.
3.
Bearing (34) and
Install.
Use a suitable driver and install seals back-to-back.
seals (33)
5-55
|
||
|
||
