| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-217-34
(5) Lift the injector nut straight up by hand, being careful not to dislodge the spray tip and valve parts off
bushing and place in a clean receptacle.
(6) If the spray tip can not be pushed from the nut with the fingers remove as shown in figure 3-15.
Figure 3-15. Removing spray tip from fuel injector nut.
f. Cleaning and Inspection.
(1) Wash all parts with clean fuel oil or cleaning solvent and dry with clean, filtered compressed air. Do
not use waste or rags. Clean all passages, drilled holes and slots in all injector parts.
(2) Remove carbon deposits from spray tip with reamer (fig. 3-16).
3-17
|
||
|
||
