| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-217-34
c. Cleaning and Inspection.
(1) Clean all parts with solvent (Fed. Spec. PD-680), and dry thoroughly.
(2) Inspect all parts for wear and damage.
(3) Replace seals (24), (29), and (30). Replace locknut (5).
e. Installation. Install the raw water pump (TM 55-1905-217-12, para 4-46).
3-8. Keel Cooler Heat Exchanger
a. Removal.
(1) Raise the landing craft from the water prior to removal of Keel cooler. (TM 55-1905-217-12, para 4-
42).
(2) Remove the hose clamps (3, fig. 3-30) and hoses (2).
NOTE
Prior to removal of keel cooler, the cooling system may be drained by removing
the drain plug (13, fig. 3-30) from each end of the cooler.
Figure 3-30. Keel cooler, removal and installation
3-39
|
||
|
||
